弱電工程布線時，都會先把電線管埋在牆裡，這樣才不會影響裝修效果，但是線管埋好後如何從裏面穿線呢?9_9_x_i_n_x_i_n_e_t
1.電線過長或需要轉彎繞線時，可從線管里加點滑石粉，便於電線抽出。
2.不同電壓，不同迴路的電線絕對不可穿在同一線管里。
3. 電線串好後，記得要將導線剪斷，另外電線接過到開關插座、接線盒等，記得預留多15cm;配電箱里要預留二分之一配電箱周長的長度;出道門外的電線則預留1m左右。
* * * * * *99信息网
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。
想了解更多關於「線管埋好後如何從裏面穿線」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063235www.99xinxi.net
——————
How to thread the thread from the inside after the line tube is buried?
1. When the wire is too long or needs to be turned and wound, you can add some talcum powder from the line pipe to facilitate the wire to be pulled out.
2. Different voltages, different circuit wires must not be worn in the same line.9 9 信 息 网
3. After the wire string is good, remember to cut the wire, and the wire is connected to the switch socket, junction box, etc., remember to reserve 15cm more; the length of the distribution box should be reserved in the distribution box; The wires outside the exit door are reserved for about 1m.
* * * * * *
LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.
For more information about 'How to thread the thread from the inside after the line tube is buried?'，please visit : http://livservices.com.hk9 9 信 息 网
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong
Tel: +852 3106 3235
