弱電工程布線時，都會將電線管埋在牆裡，那麼，電線穿管的規範方法是怎樣的呢?
1.電線較長或需要轉彎繞線時，可在線管里添加滑石粉，便於電線抽出9+9+x+i+n+x+i+n+e+t。同時要電線前端部分的絕緣層材料弄掉點，再將線芯慢慢固定在盤圈裏面VOv。
2.不同電壓不同迴路的電線是絕對不可以穿在同一個線管里9.9.x.i.n.x.i.n.e.t。假如多個照明燈的迴路是不能互相產生干擾，且不能過多穿線zmkq。
3.電線串好後要將導線剪短，如果要將點血接過到開關，插座以及接線盒，預留15cm9.9.信.息.网。配電箱里也要預留1/2的配電箱周長的長度原文www.99xinxi.net。出到門外的電線則要留一米半左右9_9_x_i_n_x_i_n_e_t。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務来自www.99xinxi.net。
想瞭解更多關於「電線穿管的規範方法」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話號碼：852-31063235
————
Normative methods for wire routing
1. When the wire is long or you need to turn the wire, you can add talcum powder in the pipe to make it easy to pull out the wire. At the same time, get rid of the insulation material on the front part of the wire, and then slowly fix the wire core inside the coil.
2. Wires with different voltages and different circuits must not be worn in the same conduit. If the circuits of multiple lights cannot interfere with each other, and do not thread too much.
3. After the wires are connected, cut the wires. If you want to connect the blood to the switch, socket and junction box, leave 15cm. Also reserve 1/2 of the perimeter of the distribution box in the distribution box. Leave the wires outside the door for about one and a half meters.
* * * * * *
LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.
For more information about \'Normative methods for wire routing\'，please visit : http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong
Tel: +852 3106 3235
