光纖熔接機的選擇應根據綜合布線工程的要求，配備蓄電池容量和精密度合適的熔接設備9.9.信.息.网。
如何設定光纖熔接機
1.熔接前根據光纖的材料和類型，設置好最佳預熔主熔電流、時間，以及光纖送入量等關鍵參數9 9 x i n x i n e t。
2.熔接過程中，及時清潔熔接機的「V」形槽、電極、物鏡、熔接室等，並隨時觀察熔接種是否有氣泡、過細、過粗、虛熔、分離等不良現象9.9.x.i.n.x.i.n.e.t。隨後注意OTDR跟蹤監測結果，及時分析產生上述不良現象的原因，採取相應的改進措施www.99xinxi.net99信息网。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務9~9~x~i~n~x~i~n~e~t。
想了解更多關於「如何設定光纖熔接機」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063
——————
How to set up a fiber splicer
1. According to the material and type of the optical fiber, set the key parameters such as the best pre-melting main fusion current, time, and fiber input volume.
2. During the welding process, clean the "V" groove, electrode, objective lens, welding room, etc. of the welding machine in time, and observe at any time whether there are air bubbles, too thin, too thick, false fusion, separation, etc. during welding. Then pay attention to the OTDR tracking and monitoring results, analyze the causes of the above-mentioned adverse phenomena in a timely manner, and take corresponding improvement measures.
* * * * * *
LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.
For more information about 'How to set up a fiber splicer'，please visit : http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong
Tel: +852 3106 3235
